GSC Power-Division Billet Evolution 9 Mivec S3 Camshafts
The GSC Power-Division billet 7009S3 cams are a hydraulic lifter profile for the Evo 9 4G63. These cams are meant for 700+ WHP to take advantage of a very large turbo. These are NOT suggested for anyone running smaller.
Warning:
This product can expose you to chemicals including Nickel (Metallic), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
More information on California Proposion 65 can be found on Proposion 65 Warnings and OEHHA websites.
The GSC Power-Division billet 7009S3 cams are a hydraulic lifter profile for the Evo 9 4G63. These cams are meant for 700+ WHP to take advantage of a very large turbo. These are NOT suggested for anyone running smaller.
**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case**
7009S3 | ADV Duration | Duration @ 0.040" | Peak Lift | Center Line |
Intake | 280° | 238° | 11.70mm | 128° |
Exhaust | 280° | 238° | 11.70mm | 115° |
Customers who viewed this product bought
-
GSC Power-Division Viton Valve Stem Seals for the Mitsubishi 4G63T
Part Number: GSC1002Out of stock