Home :: Mitsubishi :: Mitsubishi Lancer Evolution 9 (4G63T-Mivec) :: Evo 9 Camshafts :: GSC Power-Division Billet Evolution 9 Mivec S2 Camshafts

GSC Power-Division Billet Evolution 9 Mivec S2 Camshafts

GSC Power-Division Billet Evolution 9 Mivec S2 Camshafts
 
(0 reviews)  

Part GSC7009S2
Quantity in stock 10 item(s) available
Weight 10.00 lbs
Price: $725.00
Quantity (10 available)
Click here to be notified when this item is nearly out of stock

The GSC Power-Division billet 7009S2 cams for the Mitsubishi Evo 9 are designed for those with a goal of 400-700 WHP. No low end power is lost vs. the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70 WHP over the stock cams, and in some cases more in the higher RPMs. Great for 2.0L engines with stock frame turbos revving to 9000 RPMs or for stroker motors revving to 8000 RPMs. The S2 cams are suggested to run on our upgraded beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring.

  • Designed for a rev range of 4000-9000 RPMs (2.0L or 3000-8000 2.2L+)
  • 400-700 WHP applications
  • S2 cams can run on Factory ECU with custom flashing
  • Made 100% in the USA

**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case**

7009S2 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 274° 226° 11.20mm 128°
Exhaust 274° 230° 11.00mm 113°
: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
There have been no reviews