GSC Power-Division Billet 2JZ-GTE S1 Camshafts
GSC Power-Division billet S1 camshafts for the Toyota Supra 2JZ-GTE. The S1 camshafts are designed for those running an upgraded single turbo larger than 57mm. These cams will not have bottom end losses over stock cams on larger turbos; nothing but gains and will promote an extremely flat torque curve. These camshafts have proven power gains of 40-70 WHP (depending on turbo) with minimal modifications including re-shimming and mild tuning. Due to the added lift and duration these camshafts do require a single valve spring upgrade.
Warning:
This product can expose you to chemicals including Nickel (Metallic), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
More information on California Proposion 65 can be found on Proposion 65 Warnings and OEHHA websites.
GSC Power-Division billet S1 camshafts for the Toyota Supra 2JZ-GTE. The S1 camshafts are designed for those running an upgraded single turbo larger than 57mm. These cams will not have bottom end losses over stock cams on larger turbos; nothing but gains and will promote an extremely flat torque curve. These camshafts have proven power gains of 40-70 WHP (depending on turbo) with minimal modifications including re-shimming and mild tuning. Due to the added lift and duration these camshafts do require a single valve spring upgrade.
- Designed for a rev range of 3,500-8,000 RPM's
- 500-1,000 WHP camshaft set
- Idle slightly rougher than stock
7030S1 | ADV Duration | Duration @ 0.040" | Peak Lift | Center Line |
Intake | 269° | 230° | 9.90mm | 108° |
Exhaust | 269° | 232° | 9.90mm | 114° |
Related products
-
GSC Power-Division CONICAL Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ
Part Number: GSC5064
Customers who bought this product also bought
-
GSC Power-Division CONICAL Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ
Part Number: GSC5064