Billet S3 Camshaft set for EJ207 JDM/EURO WRX & STi V7+
GSC Power-Division billet S3 camshafts for the Subaru EJ207 version 7 and above with single AVCS. These camshafts are designed for drag use only, fully built engines with a power range of 750-1,300 WHP and an RPM range of 4,500-9,500. Certain engine modifications are required to utilize the true potential of the S3s: built bottom end (closed deck or sleeved), built/ported head, all supporting fueling upgrades, and aggressive dyno tuning. Upgraded valve springs are required.
Warning:
This product can expose you to chemicals including Nickel (Metallic), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
More information on California Proposion 65 can be found on Proposion 65 Warnings and OEHHA websites.
GSC Power-Division billet S3 camshafts for the Subaru EJ207 version 7 and above with single AVCS. These camshafts are designed for drag use only, fully built engines with a power range of 750-1,300 WHP and an RPM range of 4,500-9,500. Certain engine modifications are required to utilize the true potential of the S3s: built bottom end (closed deck or sleeved), built/ported head, all supporting fueling upgrades, and aggressive dyno tuning. Upgraded valve springs are required.
- Cylinder head clearancing required.
- Please maintain 0.020" (0.5mm) minimum clearance from the cylinder head casting
| 7027S3 | ADV Duration | Duration @ 0.040" | Peak Lift | Center Line |
| Intake | 280° | 240° | 11.55mm | 130° |
| Exhaust | 280° | 241° | 11.60mm | 115° |
Customers who viewed this product bought
-
![GSC Power-Division Viton Valve Stem Seals for the Subaru EJ Engine]()
GSC Power-Division Viton Valve Stem Seals for the Subaru EJ Engine
Part Number: GSC1022Out of stock
