Home :: Mitsubishi :: Mitsubishi Lancer Evolution 4-8 (4G63) :: Evolution 4-8 (4G63) Camshafts :: GSC Power-Division Billet Evolution 4-8 Stroker R2 Camshafts

GSC Power-Division Billet Evolution 4-8 Stroker R2 Camshafts

GSC Power-Division Billet Evolution 4-8 Stroker R2 Camshafts
 
(0 reviews)  

Part GSC7008R2
Quantity in stock 3 item(s) available
Weight 10.00 lbs
Price: $705.00
Quantity (3 available)
Click here to be notified when this item is nearly out of stock

The 7008R2 is a high lift, very aggressive profile, with a short overall duration to keep a lower usable RPM band. The 7008R2 is designed to rev between 4000-8500 RPMs and should be used with a stroked engine or added displacement engine. The peak lift of 12.0mm intake and exhaust will require upgraded valve springs and a titanium retainer with special attention to seal to retainer clearance. With the lift of this profile, it is suggested to only use the 5041/5040 Ti retainer and spring kits due to valve seal to retainer clearance. The 5041 can be used to 40+psi and the 5040 to 32psi on the R2 profile at 8500 RPMs without float or flutter issues. The profile will work fine on the OEM rocker arm and the zero-tick lifter, or with the OEM lifter. We have seen gains of 25-30 WHP over the S2 profile on the stroked applications, with much more possible when used with a ported head and aftermarket intake manifold.

**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case**

7008R2 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 274° 236° 12.00mm 109°
Exhaust 274° 236° 12.00mm 115°
: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
There have been no reviews