Home :: Subaru :: Subaru EJ257/EJ255 INTAKE AVCS :: Subaru EJ257/EJ255 (AVCS Intake) Camshafts :: Billet S3 Camshaft set for Subaru EJ255/7 with Intake AVCS

Billet S3 Camshaft set for Subaru EJ255/7 with Intake AVCS

Billet S3 Camshaft set for Subaru EJ255/7 with Intake AVCS
 
(0 reviews)  

Part GSC7025S3
Quantity in stock 5 item(s) available
Weight 18.00 lbs
Price: $1125.00
Quantity (5 available)
Click here to be notified when this item is nearly out of stock

GSC Power-Division billet S3 camshafts for the USDM STi and WRX with Intake only AVCS. These cams are built to suit the high horsepower drag Subis. With a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs, you need some certain mods to utilize the true potential of the S3s: built motor, with a built/ported head (clearanced for lift), and a standalone engine management system. Upgraded valve springs are required; beehive valve springs are recommended, but not required.

  • Check Pictures for cam placement. Long nose = Left Side, short nose = Right Side
  • Due to the lobe size, head castings will need to be filled down slightly for clearance - Please check during install
  • Proper break in and running high zinc oil is a must on flat tappet engines.
  • Must be installed by an experienced technician 
7025S3 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 280° 240° 11.55mm 130°
Exhaust 280° 241° 11.60mm 115°
: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
There have been no reviews