GSC Power-Division Billet Evolution 9 Mivec S1 Camshafts

Not rated yet
0

The GSC Power-Division billet S1 cams for the Mistubishi Evo 9 are designed for those with a stock turbo all the way to a GT30/50 trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains, and will promote faster spooling of the upgraded turbos. Gains of 25-40 WHP (depending on turbo) have been seen by simply bolting the S1 cams in.

    • Part Number
      GSC7009S1
    • $768.50
    Qty:  
    In stock (8 items available)
    warning Warning: This product can expose you to chemicals including Nickel (Metallic), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. More information on California Proposion 65 can be found on Proposion 65 Warnings and OEHHA websites.

    The GSC Power-Division billet S1 cams for the Mistubishi Evo 9 are designed for those with a stock turbo all the way to a GT30/50 trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains, and will promote faster spooling of the upgraded turbos. Gains of 25-40 WHP (depending on turbo) have been seen by simply bolting the S1 cams in.

    • Designed for a rev range of 3000-8000 RPMs
    • These cams work well on the stock valve springs
    • 300-450 WHP camshaft
    • Made 100% in the USA

    **If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case**

    7009S1ADV DurationDuration @ 0.040"Peak LiftCenter Line
    Intake268°216°11.00mm128°
    Exhaust268°220°10.50mm113°
    Customer reviews
    There are no comments yet. Be the first to leave a comment
    Please sign in to add review

    Customers who bought this product also bought

    Customers who viewed this product bought