Home :: Toyota :: Toyota Supra 93-98 2JZ-GTE :: SUPRA 2JZ-GTE Camshafts :: GSC Power-Division Billet VVTI 2JZ-GTE S2 Camshafts

GSC Power-Division Billet VVTI 2JZ-GTE S2 Camshafts

GSC Power-Division Billet VVTI 2JZ-GTE S2 Camshafts
 
(0 reviews)  

Part GSC7031S2
Quantity in stock 10 item(s) available
Weight 18.00 lbs
Price: $1250.00
Quantity (10 available)
Click here to be notified when this item is nearly out of stock

GSC Power-Division billet S2 cams for the VVTI Toyota Supra 2JZ-GTE. The only forged billet core *** VVTi Camshafts on the market. The S2 profile is designed for those running a large single turbo, turbos larger than 71mm typically. These cams will not have bottom end losses over our S1 cams on larger frame turbos. Gains of 60-100 WHP (depending on turbo) have been seen by simply bolting the S2 cams in and reshimming. These cams require upgraded valve springs.

  • Designed for a rev range of 4000-8500 RPMs 
  • 800WHP-1500 WHP camshaft set
  • Rougher than stock idle
7031S2 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 274° 239° 10.20mm Variable
Exhaust 274° 240° 10.50mm 118°

Install Note:

It is necessary to inspect the S2 profile in your VVTi cylinder head for casting clearance prior to running. With the higher lift and the OEM castings, some need to be clearanced to allow for the cam to spin freely in the head without contact. Please maintain 0.02" (0.5mm) clearance from the cylinder head casting.

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
There have been no reviews